General Archive

Safety Essentials for Active Construction Sites

Within an ever-changing construction site, there are numerous variables to consider in terms of safety management issues go. There are many risks inherent to the industry of construction, and these are difficult to handle, since the work itself is really fluid. The construction industry is considered one of the most dangerous by which to work. In the last several decades, several regulations are becoming standard for these sites, making them safer than in the past. The generalized risk isn’t only to the workers, but to passersby as well as people within the general area of the site (in the case of environmental pollution).

Machinery

Heavy equipment is the lifeblood on most active construction sites. Nevertheless , these machines can and do malfunction, which can cause injuries or fatalities. The first line of defense against injuries caused by equipment is obviously maintenance and training. These two in conjunction can go a considerable ways to prevent heavy equipment failure.

Signage

Believe it or not, one of this biggest reminders of safety comes in the form of a warning sign. While there are people who will ignore signs posted around construction sites (these are the same people who need the “Coffee is hot” printed on cups), for the vast number of individuals, signage is followed.

Proper safety clothing and accessories

Wearing the proper clothing, as well as head, foot, eye, lung and ear protection has increased and is mandatory of all construction sites to meet regulations set forth by OSHA. Actually regulations require that employers pay for all PPE (personal protection equipment) when needed on any construction job.

Barriers

The proper fencing keeps the public out of dangerous sites. Many construction accidents involving the public occur when untrained people are on a website and cause an event or chain of events that cascades into a disaster. Fences are also used in the case of a drainage ditch or silt collection pit to prevent accidental drowning in deeper water.

Three Steps to Improve Construction Site Safety

You will find three major issues that every construction site faces whenever using water safety. These are regulated by most communities plus the Environmental Protection Agency. To guard the water supply surrounding a construction site, measure must be taken to control contaminated wastewater runoff, sediment control, and erosion control. Each one of these can be harmful to the environment.

Contaminated runoff control

There are many substances that can enter the waste water runoff coming from an energetic construction site. These can sometimes include: motor oil (from heavy machinery that may leak), gasoline, paint, paint thinners, or other noxious chemicals. These spill should be cleaned up and the contaminated soil properly disposed of immediately with a trained construction worker following already established HAZ-MAT directions. If these chemicals enter the water that runs off of the site, the result may be contamination of the water supply for the community in particular and/or kill plants or animals living in or around the streams, rivers, lakes, and so forth

Sediment control

When grading of a site occurs, the underlying and newly exposed layers of soil are specifically prone to be carried away with any water that passes over the surface. In wet months or rainy climates, this is of a greater concern. Sediment can change the dynamics of the neighboring streams, rivers and lakes and will harm the flow of water over time. These artificial sedimentary dams can be quite damaging to the environment as a whole and care should be taken to protect newly graded land from being washed away, especially during rainy seasons when extortionate water runoff can wreck havoc on the drainage. Street flooding around construction sites can be caused by improper preventative measures being taken or an inlet filter system that is not being properly maintained.

Erosion control

Along with the dilemma of water carrying excess sediment, causing damming or changing the face of the water system, the opposite can occur. Construction grading activities and a rainstorm can cause the newly graded soil to erode. This could potentially cause a requirement for added fill dirt or re-grading the soil.

All these activities are inter-related inside their eventual effects on the environmental surroundings and each can be addressed using a very effective tool, an inlet filter, that will filter sediment, can control and contain contaminant chemicals and collect debris from runoff that naturally happens at a construction site. These filters are economical solutions to a significant problem for active construction sites.